设备- 营
分析实验室设备
Tescan MIRA 3 GMU – TIMA X field emission scanning electron microscope (FESEM) with an EDAX Octane Elect energy dispersive X-ray spectrometer, EDAX TEXS波长色散x射线光谱仪, EDAX DigiView电子背散射衍射探测器, 和Tescan全色阴极发光探测器.
Tescan TIMA GMS field emission scanning electron microscope (FESEM) for dedicated automated mineralogical analysis with an EDAX Octane Elect Plus energy dispersive X-ray spectrometer for detailed post-run analysis.
Thermo iCAP-6500双视图
Rigaku Ultima IV, with HT 1500 high temperature attachment, (up to 1500 °C). 能在空气、气体或真空中操作吗.
材料实验室设备
机械测试实验室设备
Instron 3369 11 kip [50kN]机电试验架
![Instron 3369 11 kip [50kN]机电试验架](/camp/equipment/images/instron-new.jpg)
MTS Landmark 55 kip [250 kN]伺服液压试验架
Tinius Olsen, IT 542, Charpy configuration with 542 J (400 ft•lbf) maximum available energy
REL sure测试系统，带加热室(高达500°C)
TecQuipment SM1090
Mituyoto Hardmatic HH-334 Durometer for Shore D hardness of composites, plastics and rubber
LECO LM300AT Digital Microindentation Tester for Vickers Microhardness Testing
Mitutoyo HR-400 automated hardness tester with Rockwell A, B, and C scales
TA Instruments SDT-650 for Differential Scanning Calorimetry (DSC) and Thermal Gravimetric Analysis (TGA)
TA Instruments Discovery TGA 550 热重分析仪
选矿实验室设备
破碎 由Sturtevant实验室辊式破碎机, 颚式破碎机, 用于矿物应用的马西基辊回转式破碎机, 细川系统的塑料造粒机, 电子回收和生物炭应用.
磨 由泰坦球磨机和棒磨机, BICO粘结机, Sturtevant jet mill (micronizer) and Union Process attritor mill.
泰坦加工设备有限公司棒材轧机
联合工艺磨料厂
分裂 by Jones type riffle splitter and Sepor 24” rotary sample splitter.
重力分离
重力分离Wilfley表, 莫兹利实验室“超级盘盘”工作台, 罗氏螺旋浓缩器, Knelson KC-MD3选矿机.
威弗利震震桌
莫兹利实验室“超级盘盘”工作台, with flat and V profile trays
磁分离
磁带磁选, 干燥鼓, 湿鼓式或湿式高强度磁选机.
Eriez稀土干带式磁选机
Eriez 24 "永磁多元件干式滚筒分离机
静电分离
静电分离 by surface charge using an electrostatic separator.
粒度分析 by Sieve, Zetasizer, and scanning electron microscopy (SEM).
电动轻拍振动筛
扫描电镜图像显示颗粒和粒度分析数据
金相实验室设备
切割
切割和切割金属, 陶瓷, and polymers can be done on our various rotary saws and surface grinder. 切割 and sectioning tools include an Allied Powercut 10, Techcut 4, and Turnpro surface grinder.
越来越多的
越来越多的 of specimens for SEM, grinding and polishing, or other analysis is routine. We can do cold mounting in epoxy or hot mounting using our LECO MX400 mounting press.
研磨/抛光
Most samples require some level of grinding or polishing for SEM-based techniques or metallographic analysis. Samples are typically prepared using our Buehler AutoMet 250 Pro automatic rotary polisher and Buehler VibroMet 2 Vibratory polisher. 表面磨削也可以.
Buehler AutoMet 250 Pro自动抛光机
Buehler VibroMet 2振动抛光机
TurnPro平面磨床
Leica DM IL LED Inverted Reflected Light Microscope, magnification up to 100X.
徕卡S8AP0立体显微镜，放大倍率高达80倍.
HiRox数码成像显微镜
Ametek SPECTROMAXx 电弧/火花光学发射光谱金属分析仪. This instrument is used to characterize the bulk composition of metal alloys. 标准适用于铝、钢和钛.
If you have questions or ideas for collaboration, please reach out.
营主任
(406) 496-4343
Rwhite@find-top.com